产品展示
当前位置:首页 >>产品展示 >>服务器机柜
 
 
 
   
 
 
详细介绍

特殊设计的螺母,适用于安装在PS系统孔上, 有一可拆下的插入辅助件,由压铸锌制造。
带弹簧片的螺母 
作为插入件所设计的承压弹簧可在PS系统孔 中形成可靠的机械和电气连接。

特殊设计的螺母,适用于安装在PS系统孔上, 有一可拆下的插入辅助件,由压铸锌制造。
1、导用FIPFG-现场发泡成型技术,表面结皮均匀而且弹性优良。
2.箱体和箱门上都可安装接地线,连接件可以卸下。
3.坚固的用螺丝固定的长方框,每隔25毫米有一个嵌孔,用来固定槽沟、护板、电
缆束及线路图插袋等。
4.箱体和箱门在制造时已钻好孔眼,如欲改变铰链的安装部位,就以此为基准,所以在箱体背面不经钻孔,便可安装箱门。
5.暗铰链既不突入门框内也不突入箱体内,门容易安装及更换,门开至130°,更换铰链可开至180°。

English:

Specially designed nuts are fit to be installed on the PS system holes. There is a zinc die- casting inserted auxiliarypart that can be detache .

The pressure-bearing springs designed as inserted parts can make reliable mechanic and electric connections inside the PS system holes.

Specially designed nuts are fit to be installed on the PS system holes. There is a zinc die- casting inserted auxiliarypart that can be detache.
Nuts with spring strips

Lead with FIPFG-site foam molding technology, the surfacecrust uniformand excellentflexibility.

The grounding wires can be fixed on case body and case door.The connecting
parts can be detached.

Strong rectangular frame fixed by screws, an inset hole every 25cm to fix the slotting auger, guard board,bunches of cablesand circuit diagram sidekicks, etc.

Holes have been drilled on case body andcase doors. If the fixing position of hinges needs to be changed, the holes can be used as reference, and therefore the case doors can be installed without once more drilling holes.
Blind hinges don't stick into doorframe and case body so that the doors can be easily installed and changed.Doors can be opened to 130°, even 180°when changing hinges.