产品展示
当前位置:首页 >>产品展示 >> 数据中心机柜
 
 
详细介绍

■冷热空气相隔离,不紊流,不短路,制冷效率高,节省能耗成本;

■散热效果好,比单台机柜的制冷效率有明显提高,提高机柜设备的安装密度;节省机房的空间;

■通道顶板有磁力锁吸附在顶盖边框上,磁力锁电源有消防系统控制,出现消防警报情况时,机房消防系统强制关闭电源,顶盖在重力作用下打开,对冷通道区域进行气体消防,安全可靠;

■模块化安装,整套系统的所有安装都是通过工厂加工成模块化的形式到现场,方便安装;

■通道两头门板采用推拉门或电动门,不占用走道空间,可选带观察窗的钣金门或落地玻璃门;

■配数字密码锁或用户指定锁型;

■通道顶部采用透明玻璃做盖板,打开后,距地面高度方便人员进出,不会对操作者造成任何伤害;

■通道顶部配节能灯;

■通道顶罩部件和前后门部件连接处配有密封条,极大提高制冷效率;

■通道内安装温度、湿度、烟雾等传感器,采集信号以供精密空调对通道内的温度及湿度进行调节及传送给消防系统控制信号;

■通道内部可选安装摄像头,门板上方可选安装温度、湿度显示屏以便对通道内部进行实时监测与控制。

 

标准:符合ANSI/EIA RS-310-D、IEC297-2、DIN41491;PART1、DIN41494;PART7、GB/T3047.2-92标准;兼容ETSI标准。

材料:方孔条、安装梁耐指纹镀铝锌板;其余SOCC优质冷轧钢板。

厚度:方孔条、顶盖2.0mm;骨架、安装梁1.5mm;其余SPCC1.2mm。

表面处理:方孔条、安装梁本色,其余:脱脂、磷化、静电喷塑。

English:

■Isolated, not - hot and cold air turbulence, short circuit, high cooling efficiency, save energy and cost;
■Energy and heat dissipation effect is good, than a single cabinet refrigeration efficiency is obviously improved, improve equipment rack mounting density; save room space;
■Channel roof has a magnetic lock adsorbed on the cover frame, magnetic lock power supply fire control system, fire alarm, engine room fire system forced to shut off the power supply, open the cover under the action of gravity, the area of the cooling passage of gas fire, safe and reliable;
■Energy modular installation, all the installation of the whole system is achieved through the processing factories into modular form to the scene, convenient installation;
■Passage two door with sliding door or an electric gate, does not occupy space corridors, Kinmen or landing glass window of the sheet metal door with optional observation;
■ with digital password lock or user specified lock type;
■Channel, top of the transparent glass cover plate, after opening, height from the ground to facilitate personnel in and out, not the operator caused any harm;
■In the top of the channel with energy-saving lamps;
■ channel top cover parts and components are connected with the rear door sealing strip, greatly improve the refrigeration efficiency;
■Channel installed temperature, humidity, smoke sensor, signal acquisition for precision air conditioning the channel temperature and humidity adjusting and transmitted to the fire control system control signal;
■Channel internal optional installation of cameras, the door at the top of the optional installation temperature and humidity display screen to on the inner channel of real-time monitoring and control.
Standard: RS-310-D IEC297-2, ANSI/EIA, DIN41491,, PART1, DIN41494, PART7, GB/T3047.2-92, ETSI, standard.
Material: square hole, installation beam fingerprint resistant aluminum zinc plate; the rest of the SOCC high quality cold-rolled steel plate.
Thickness: square hole, top cover 2.0mm; frame, installing beam 1.5mm; the remaining SPCC1.2mm.
Surface treatment: square hole, mounting beam qualities, the rest: degreasing, phosphating, electrostatic spray.