产品展示
当前位置:首页 >>产品展示 >>型材电力机柜
 
 
 
   
   
详细介绍

产品一介绍:
01 、柜门离地25mm
02 、2.5mm 厚的安装板,两边有20mm 宽的U 形弯边,使得安装板强度更大,也便于搬运
03 、箱底三块电缆导入盖板可以相互替换,移动方便,易于导入电缆,易于开孔进线
04 、柜门上有接地螺丝
05 、承重铰链,安装容易,换柜门也容易。柜门可开启130°
06 、塑料滑引器利用塑料滑引器通过导轨,可从正面将安装板推入柜内
07 、坚固的长方形框架不但可以加强前门的强度,还可以用来固定安装电器元件(配合门安装横条使用)
08 、背板能很容易地安装,用螺丝固定;还可换装柜门
09 、密封圈:聚氨脂发泡密封胶条,确保防护等级
10 、柜边与密封圈配合防止水和灰尘落入柜内
11 、(单门)左右互换开门设计,方便使用
12 、标准模数化安装孔设计,方便安装
13 、内灯,方便安装和检测(自选件)
14 、文件袋,方便现场工作(自选件)
15 、安装梁,不使用安装板同样可以进行柜内安装(自选件)
16 、风机及过滤网,保证柜内通风,防护等级IP54(自选件)
17 、双安装板,安装容量大(自选件)

English:

01. Cabinet door is 25mm above the ground.
02. 2.5mm thick installation plate, both sides with U curve 20mm width, making installation plate more strengthful, for easy transportation.
03. Three cabinet bottom cable entrance cover plates,can be interchanged, move convently, easily conducting cable,easy to open hole for cable entrance.
04. Ground bolt
05. Bearing hinge, install easily, change cabinet door also easily. cabinet door can open 130°
06. Plastic slip inducer makes use of plastic slip inducer over guiding rail,can push installation plate inside the cabinet from front.
07. Rigid rectangular frame can not only strengthen the strength of front door, but can also be used to fix installed electric appliance component ( with of horizontal door installion strip).
08. Back plate can be installed easily, fixed with screw; cabinet door can also be changed.
09. Seal ring: polyurethane sealing strip ensures protection grade.
10. Cabinet side matches with seal ring to prevent water and dust from entering cabinet.y usa
11.( Single door ) left-right interchangable opening design for easge.
12. Standardarized moldular installation hole design, convenient installation.
13. Internal light, convenient installation and inspection.(selective)
14. Document bag, convenient site work.(selective)
15. Installation beam, can also perform inside installation without installation plate(selective)
16. Fan and filter element , ensure well cabinet inside ventilation, protection grade Ip54(selective)
17. Double installation plate,big installation capacity (selective ).

产品二介绍:
并柜连接 :多台机柜连接在一起使用,安装板都按规定位置统一安装在柜体框架上,形成一个完整地安装平面,有利于各种电器元件的方便安装,并且最大限度的发挥了柜 体的安装空间。
1、适用于低压配电装置及大型控制设备安装,内部结构可选择各种横梁、竖梁结构,完全模块化的理念,使用更为明快便捷 。不同形式的通风结构,各种尺寸的通风口,内部带有防尘网,清洗方便,通风效果优良,照明灯形成开关装置,更显高档柜体品质。
2、柜体框架、后背板、顶板、底板、侧板、前门可卸装;
3、方管连接形成方框结构安装在前门内,确保前门的强度;
4、材料:薄钢板; 柜体框架:九折型材 ; 
门:2.0mm  后背板:1.5mm 
安装板:2.5(3.0)mm

English:

Cabinets connecting: many cabinets can be connected. The installing plates are fitted on the cabinet bodyframework, forming a whole fitting surface. This is good for the installment of the electronic parts and can fully use the installing space of the cabinets.
1.It is suitable for the assembly of low voltage electricity distribution and large-scale control equipment. Theinner structure can use horizontal and vertical. The idea of modularization makes it is convenient to use. Ventilation structures of different kinds, intake of different specifications, inside dustproof net make it easy to use with the good ventilation effect. The travel switch of spotlights reflects the noble quality of the cabinet body.
2.The cabinet body framework, back plate, top plate, bottom plate, side plate and the front door can be disassemblied.
3. The quadrate tubes form the quadrate framework and is fitted inside the front door to ensure the firmnessof the front door.
4、material thin steel plate; cabinet body framework:9-fold profile; ,
door:2.0mm  back plate:1.5mm 
installing plate:2.5(3.0)mm